Skip Navigation Website Accessibility

Phone: 714-636-1322

   
 
 


Button Foot with Placement Tool

This presser foot for sewing on buttons raises the button slightly off the fabric to give a slight thread shank to enable easy buttoning, and prevent the button from being sewn too tightly to the fabric.

Other information

1. Thread with matching sewing thread on top and in the bobbin. Snap on the Button Foot.
2. Slide the Retractable Thread Shank Guide into the desired position. All the way back will give you no thread shank. The first position will give you a shorter shank for light weight fabrics. The second position (all the way forward) will give you a longer thread shank for heavier fabrics.
3. For a button smaller than 1/4" (6 mm), use the Placement Tool. Insert the Button Placement Tool into the holes of the button. Note: Avoid using a button higher than 1/8" (3 mm)
4. Insert the Button Placement Tool with the button in place into the slot in the foot. The button will automatically be placed in the correct position for sewing.
5. Remove the Button Placement Tool.
6. Select “Button Sewing” on your Sewing Advisor. Adjust the Stitch Width if necessary according to the width between the holes in the button.
7. Sew on your button following the instructions in your User's Guide.

not for EMERALD™ series

Follow Us

 

Contact Us

Garden Grove (Sewing & Vacuums)
Address:
13071 Harbor Blvd
Garden Grove, CA 92843
P: 714-636-1322
Hour:
Mon – Fri 9:30 am - 6:00 pm
Sat 9:00 am – 5:00 pm
Buena Park (Sewing)
Address:
5885 Lincoln Avenue
Buena Park, CA 90620 (Inside JOANNs)
P:714-236-4835
Hour:
Mon. - Sat. 9:00 am – 9:00 pm
Sun 10:00 am - 7:00 pm
Irvine (Sewing)
Address:
2170 Barranca Pkwy
Irvine, CA 92606 (Inside JOANNs)
P: 949-474-7511
Hour:
Mon. - Sat. 9:00 am – 9:00 pm
Sun 10:00 am - 7:00 pm
Apply for Financing